2001 Okuma & Howa 2SP-25HG

Twin Spindle CNC Lathe

Control: Fanuc 18-T

BASE MACHINE CAPACITY:
MAXIMUM CUTTING DIAMETER.... 13.78"
MAXIMUM CUTTING LENGTH.........7.87"
DISTACE BETWEEN SPINDLES.......15.75"
SPINDLE CENTER FROM FLOOR.....47.44"

SPINDLES:
SPINDLE MOTORS
(FANUC ALPHA 16/6000 X 2 25 HP)
SPINDLE SPEED RANGE........45-4500 RPM
MACHINE EQUIPPED WITH:..10" 3- Jaw Chucks
SPINDLE NOSE.........................A2-6
DRAWTUBE THROUGH HOLE DIA..2.01"
FRONT BEARING DIAMETER.........3.94"
MAX. WEIGHT ON SPINDLE W/CHUCK...242 LBS

AXIS DRIVES:
X AXIS TRAVEL..............................6.89"
Z AXIS TRAVEL..............................8.27"
X AXIS THRUST & Z AXIS THRUST
1,543 / 1,708 FT/LBS

X & Z AXIS BALLSCREW DIAMETER....1.10"
X & Z AXIS RAPID TRAVERSE RATE....945 IPM
X AXIS POSITIONING ........+-0.0006" / 3.94"
X AXIS REPEATABILITY.......+-0.0001"
Z AXIS POSITIONING ........+- 0.0009" / 11.81"
Z AXIS REPEATABILITY.......+-0.0002"
FEEDRATES................. 0.0001 - 5.24 IPR
COOLING SYSTEM FOR BALLSCREW FORCED OIL

TURRETS:
TURRET TYPE
(FANUC ALPHA 6/2000 MOTOR)..V10 + V10
CURVIC COUPLING DIAMETER.........6.61"
CLAMPING FORCE................... 6,173 LBS
INDEXING TIME(TOOL-TOOL)...... 0.2 SEC.
STANDARD TOOL SIZE............ 1.0" X 1.0"
MAXIMUM BORING BAR SIZE... 1.75" OD

MACHINE SIZE & MASS:
HEIGHT......,,..............................126"
FLOOR SPACE REQ..........113.4" X 161.5"
WEIGHT.............................15,400 LBS

CNC LOADER INFORMATION:
3-AXIS SINGLE ARM CNC GANTRY LOADER WITH TURN OVER STATION , UP TO 4,724 IPM, (16) STATION RIGHT SIDE ROTARY STACKER UNIT
2-3 JAW LOADER UNITS.TURN-AROUND STATION
2-CHUCKS, TWO ACTUATORS.

STANDARD WORKPIECE MAXIMUMS WITH THE LOADER:DIAMETER................7.87"
Note: * 8.5" Standard Max without modifications

LENGTH................................4.72"
WEIGHT................................17.6.LBS

LOADER SPEEDS / TIMES:
LONGITUDINAL (L/R) A AXIS.....4724 IPM
A AXIS STROKE......................77.17"
VERTICAL B-AXIS....................4.724 IPM
B-AXIS STROKE......................33.46"

HORIZONTAL (IN/OUT) C AXIS..1575 IPM
C AXIS STROKE......................11.02"
LOADING TIME...................... 8 SECONDS
MINIMUM CYCLE TIME.............35 SECONDS

LOADER AND TURNOVER CHUCKS:
JAW STROKE..........................1.26"
ACTUATION METHOD.............. FORCED AIR

-EQUIPPED WITH-

AUTOMATIC GANTRY LOADER WITH (16) STATION PALLET POOL
HEAVY-DUTY SIDE DISCHARGE CHIP CONVEYOR,
COOLANT TANKS,
(2) 10” 3-JAW ROTO-SCHUNK HYDRAULC CHUCKS INSTALLED
ALL BOOKS AND MANUALS

*****Two Identical Machines Available*****