2007 Birmingham DLC-2080

Manual Engine Lathe

Swing over bed: 20"
Swing over cross slide: 11-3/8"
Swing over gap: 30"
Length of gap: 10"
Distance between centers: 80"
Spindle Bore: 4-1/8" (This has the extra bore opening)
Spindle nose type (Camlock): D1-8
Spindle taper: MT-6
Spindle speeds: 16
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 9-3/4"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Leadscrew TPI: 2
Feed rod diamter: 1" Hex
Tooling size: 1" x 1"
Compound slide travel: 5-7/8"
Cross slide travel: 13-3/4"
Tailstock taper: MT-5
Quill travel: 6"
Quill diameter: 3"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
New Weight Approx: 5090 Lbs.

STANDARD EQUIPMENT

12" 3 Jaw Chuck with reversible jaws
16" 4-Jaw Chuck
19" Face plate
Steady rest capacity 1-1/8 - 7-7/8"
Follow rest capacity 3/4" - 4"
Dead centers, MT-4
Foot Brake
Threading Dial
Coolant System w/Full Length Splash Guard
Halogen work lamp