2015 Doosan PUMA MX2600ST
CNC Turning Center
Capacity:
Swing over bed: 39.3"
Swing over carriage: 27.56"
Maximum bar capacity (2.95" right spindle w/work ejector): 3.00"
Maximum turning diameter, main spindle: 29.9"
Max. weight (including chuck) chuck work/shaft work: 463 / 2,006 lbs.
Maximum turning length: 60.6"
Distance between spindle noses: 72.2"
Spindles:
Chuck size: 10"
Spindle speed: 4,000 RPM
Spindle nose: A2-8
Left spindle drawtube ID: 3.03"
Right spindle drawtube ID: 2.95"
Spindle bore diameter: 3.38"
AC high torque spindle motor (30 min. rating): 35 HP
Maximum spindle torque (25% ED): 516 ft-lbs
Left/Right C-Axis:
Minimum programmable angle (degrees): .001
Rapid traverse rate (RPM): 400
C-axis repeatability: +/- .006 deg.
C-axis positioning accuracy: .0167 deg.
Milling Spindle:
Spindle speed: 12,000 RPM
Motor power (15 min. rating): 30 HP
Maximum spindle torque (15% ED): 87 ft-lbs
Tool index (2,3 or 4 insert multi-tools): 30 deg.
B-axis (tilt) coupling increment: 5 deg.
B-axis travel: 240 (+/- 120) deg.
B-axis minimum increment: 0.001 deg
B-axis positioning accuracy: 0.006 deg.
B-axis repeatability: +/- 0.002 deg.
Travels:
X1 (upper) axis travel: 24.8"
X2 (lower) axis travel: 8.66"
Z1 (upper) axis travel: 62.4"
Z2 (lower) axis travel: 59.6"
Angle of slant bed: 60 degrees
X1 axis rapid traverse rate: 1,417 IPM
417 IPM Z1 axis rapid traverse rate: 1,417 IPM
Y-Axis:
Y-axis travel: 9.05" (+/- 4.52")
Y-axis rapid traverse rate: 1,024 IPM
ATC:
Tool holder type: CAPTO-C6
Tool storage capacity: 40 (Opt. 80)
Max. tool diameter: 3.54"
Max. tool diameter w/o adjacent tools Max. tool diameter w/o adjacent tools: 5.12"
Max. tool length: 15.74"
Max. tool weight: 22 lbs.
Tool change time (tool to tool): 1.8 Seconds
Turret - Lower:
Number of tools: 12
Tool holder type: BMT 65P
Live Tools Lower:
Rotating tool RPM: 4,000 RPM
Rotating tool spindle motor (continuous): 6.7 Hp
Rotating tool torque (continuous): 12.5 ft-lbs
General:
Floor Space (L x W): 239" x 103"
Length with hinge belft chip conveyor: 263"
Machine Height: 119"
Net Weight: 34,170 Lbs
Voltage: 205 - 235 V / 3 Ph
Power Requirement (262 Amps @ 220 Volts): 100 kVA
-EQUIPPED WITH-
Fanuc 31i Model A5 Dual Pathe Control
High speed 4,000 RPM spindles
Powerful (26kW) 35 HP high-torque integral spindle motors
Refrigerated temperature control system for both spindles
Large (76mm) 3" bar capacity
Milling, drilling, and tapping capabilities
Servo Driven 40 station ATC with 1.8 sec tool to tool time
Fast 12,000 rpm milling spindle
(22kW) 30 Hp milling spindle motor
Y-axis with (230mm) 9.05" stroke
Thermal Growth Compensation
BT-axis (tilting) 240 degrees
Roller gear cam (RGC) type B-axis gear train
12 Station lower turret with rotary tool capability
Base mounted tooling (BMT) system on lower turret
Full contouring C-axis
Rigid tapping on left and right spindles, milling spindle and rotary tools
Tool monitoring system - wear and breakage detection
Pretensioned X and Z axis ball screws
Fast (36m/min) 1,417 IPM rapid traverse
Electric torque limiter crash protection
Automatic tool setter
Separate coolant tank
Large (760mm) 29.9" maximum turning diameter
(10 bar) 145 PSI coolant pump for milling head
Way lube separation system
Right spindle body positioning by ball screw & servo motor
Right spindle can be synchronized with left spindle
 
 
 
 
 
 
REQUEST A QUOTE FOR THIS MACHINE
Go back to the home page ----} HOME PAGE
Two Spade Machinery LLC, Phone: (802) 518-4161 & (802) 376-8157, Email: sales@2spade-server.com, Web: www.2spade.com
|